What EV Charger Do You Need for a 2023 Tesla Model X Plaid?
Forty-eight amps is the magic number for the Tesla Model X Plaid. Plug into a 48 amp Level 2 setup to refill the 114.4 kWh battery from empty in 10.0 hours. You get 33 miles of range per hour of charging at this rate.
The numbers
| Maximum AC charging rate | 11.5 kW (48 A) |
|---|---|
| Charger size to buy | 48 A |
| Circuit breaker required | 60 A |
| Outlet / connection | hardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it) |
| Charge port | NACS |
| Full charge on Level 2 | about 10.0 hours |
| Range added per hour (Level 2) | about 33 miles |
| Full charge on a 120 V outlet | about 79 hours |
| Range added per hour (120 V) | about 4.2 miles |
| EPA rated range | 333 miles |
| Energy for a full charge | about 114.4 kWh at the wall |
Why 48 amps and not more
The car accepts a maximum of 11.5 kW, which translates to 48 amps at 240 volts. Buying a larger charging unit makes zero difference because the onboard charger limits intake. Pushing more amperage through the breaker will not speed up the charge. Stick to 48 amps. It matches the vehicle hardware limit precisely.
What the install involves
A 48 amp EVSE demands a 60 amp dedicated breaker. Hardwiring is mandatory because no standard wall receptacle handles continuous 48 amp loads safely. Run heavy-gauge copper wire from the main panel to the garage wall. Hire an electrician for this hookup unless you hold a current electrical license.
Chargers that match this car
Your car has a NACS port. The NACS units below plug straight in; any J1772 unit works with the adapter supplied with the car.
Native NACS plug, no adapter needed.
Dual plug: works with NACS and J1772 cars.
Tesla's own unit. Native NACS, hardwire only.
Worth having as well
Common questions
- Can I plug this car into a standard wall outlet?
- Level 1 charging takes 79 hours to reach full capacity. You gain 4.2 miles of range per hour on a normal household plug.
- Why does the EPA charge time differ from the max rate?
- The EPA test takes 14.0 hours at 24 miles per hour. Standard testing protocols do not run at the peak AC rate of the vehicle.
- What connector does the car use?
- Tesla vehicles use the NACS connector natively. A J1772 adapter arrives in the trunk for third-party Level 2 units.
- Do I need a Tesla brand Wall Connector?
- Any 48 amp Level 2 EVSE with a NACS plug works fine. The Tesla Wall Connector is native and hardwires directly to the 60 amp circuit.
Other vehicles
Charging times derived from EPA data for the 2023 Tesla Model X Plaid (covering 2 EPA trim listings). Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.