BuyWhatFits

What EV Charger Do You Need for a 2024 Lucid Air Sapphire?

What to buy
A 80 A charger on a 100 A circuit
Your 2024 Lucid Air Sapphire accepts at most 19.2 kW (80 A) of AC power. A larger charger will not charge it faster.

You need an 80-amp circuit to charge this sedan at its top Level 2 rate. The 137.2 kWh battery pack demands a heavy electrical feed to refill overnight. Charging takes 7.1 hours at peak output. Slower setups will leave the car plugged in much longer.

Matches your car
Autel MaxiCharger Level 2 80A
80 A · J1772 · hardwire
See it on Amazon

The numbers

Maximum AC charging rate19.2 kW (80 A)
Charger size to buy80 A
Circuit breaker required100 A
Outlet / connectionhardwired only
Charge portJ1772
Full charge on Level 2about 7.1 hours
Range added per hour (Level 2)about 60 miles
Full charge on a 120 V outletabout 95 hours
Range added per hour (120 V)about 4.5 miles
EPA rated range427 miles
Energy for a full chargeabout 137.2 kWh at the wall

Why 80 amps and not more

The car accepts up to 19.2 kW through its onboard charger, drawing 80 amps. Feeding it anything less throttles the intake speed. A smaller 48-amp or 50-amp supply leaves available vehicle capability on the table. Pushing past 80 amps does nothing because the onboard hardware caps the draw. Stick to the 80-amp specification to match the factory limits.

What the install involves

This setup requires a 100-amp breaker to safely handle the continuous 80-amp load. Plugs cannot handle this level of sustained draw, so the unit must be hardwired directly into the electrical supply. Pulling 100 amps demands heavy gauge copper wire and proper torque on every terminal. Hire an electrician for this work because residential panels rarely have spare capacity without a load calculation.

Chargers that match this car

The first unit matches your car's full 80 A. The others are slightly slower but cost less.

MaxiCharger Level 2 80A
80 A · J1772 · hardwire · 25.0 ft cable
One of the few home units that can feed an 80 A car. Needs a 100 A circuit.
See the Autel MaxiCharger Level 2 80A
Home Flex 50A Hardwired
50 A · J1772 · hardwire · 23.0 ft cable
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
See the ChargePoint Home Flex 50A Hardwired
Level 2 EV Charger 48A
48 A · J1772 · both · 24.0 ft cable
Energy monitoring built in. Hardwire it for the full 48 A.
See the Emporia Level 2 EV Charger 48A

Worth having as well

Tesla to J1772 Charging Adapter 80A
Lets a J1772 car use Tesla Destination Chargers and Wall Connectors.
See the Lectron Tesla to J1772 Charging Adapter 80A
J1772 Extension Cable 20ft 40A
For when the charger cable will not reach your car's port.
See the EVCONN J1772 Extension Cable 20ft 40A
As an Amazon Associate we earn from qualifying purchases. Prices and availability are not shown here because they change constantly, so check the current price on Amazon.

Common questions

Can I use a standard wall outlet?
Level 1 charging on a standard household outlet yields 4.5 miles of range per hour. A full recharge from empty takes 95 hours. That speed is useless for daily driving.
Why does the EPA charge time differ from the peak rate?
The EPA test does not run at the car's peak AC rate, listing 13 hours at 33 miles of range per hour. Your actual time hits 7.1 hours at 60 miles per hour when running the full 80 amps.
What plug type does the car use?
The charge port accepts a J1772 connector. Every non-Tesla EV sold in North America through 2024 uses this connector for AC Level 2 charging.
How much range do I get per hour?
At maximum Level 2 power, the car adds 60 miles of range for every hour plugged in. Efficiency sits at 32.1 kWh per 100 miles across a 427-mile total range.

Other vehicles

2026 Lucid Air G Touring XR2026 Lucid Air Pure2026 Lucid Air Sapphire2026 Lucid Air Touring2025 Lucid Air G Touring XR2025 Lucid Air Pure

Charging times derived from EPA data for the 2024 Lucid Air Sapphire. Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.