BuyWhatFits

What EV Charger Do You Need for a 2025 Cadillac Lyriq?

What to buy
A 48 A charger on a 60 A circuit
Your 2025 Cadillac Lyriq accepts at most 11.5 kW (48 A) of AC power. A larger charger will not charge it faster.

A full charge takes 10.2 hours on a Level 2 setup. That timeline easily fits into a standard overnight window. You need a 48 amp EVSE to hit that speed. Anything slower leaves range on the table.

Matches your car
Emporia Level 2 EV Charger 48A
48 A · J1772 · both
See it on Amazon

The numbers

Maximum AC charging rate11.5 kW (48 A)
Charger size to buy48 A
Circuit breaker required60 A
Outlet / connectionhardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it)
Charge portJ1772
Full charge on Level 2about 10.2 hours
Range added per hour (Level 2)about 32 miles
Full charge on a 120 V outletabout 82 hours
Range added per hour (120 V)about 4.0 miles
EPA rated range326 miles
Energy for a full chargeabout 117.4 kWh at the wall

Why 48 amps and not more

Your car accepts a maximum of 48 amps through its onboard charger at 11.5 kilowatts. Buying a bigger 80 amp unit wastes money because the vehicle cannot draw the extra juice. A 48 amp supply puts 32 miles of range into the battery every hour. Dropping to a smaller breaker means slower overnight recovery times. Match the equipment to the maximum onboard limit for peak performance.

What the install involves

A 48 amp charger requires a 60 amp breaker to handle continuous loads safely. Hardwiring is mandatory here because no standard household receptacle is rated for 48 amps. Call a licensed electrician to pull the wire and land it on the main panel. Have them check if your current electrical service has spare capacity for the heavy load.

Chargers that match this car

Level 2 EV Charger 48A
48 A · J1772 · both · 24.0 ft cable
Energy monitoring built in. Hardwire it for the full 48 A.
See the Emporia Level 2 EV Charger 48A
Pulsar Plus 48A
48 A · J1772 · hardwire · 25.0 ft cable
Compact unit, good for tight garages.
See the Wallbox Pulsar Plus 48A
Home Flex 50A Hardwired
50 A · J1772 · hardwire · 23.0 ft cable
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
See the ChargePoint Home Flex 50A Hardwired

Worth having as well

Tesla to J1772 Charging Adapter 80A
Lets a J1772 car use Tesla Destination Chargers and Wall Connectors.
See the Lectron Tesla to J1772 Charging Adapter 80A
J1772 Extension Cable 20ft 40A
For when the charger cable will not reach your car's port.
See the EVCONN J1772 Extension Cable 20ft 40A
As an Amazon Associate we earn from qualifying purchases. Prices and availability are not shown here because they change constantly, so check the current price on Amazon.

Common questions

Can I use a normal wall outlet?
Level 1 charging from a standard household outlet gives you 4.0 miles per hour. That takes 82 hours for a full fill, which is too slow for daily driving. You need a dedicated Level 2 circuit.
What connector does the car use?
It uses a J1772 connector. This model year falls in the industry transition to NACS ports, so check your specific car before buying hardware. An adapter handles older or alternate stations if needed.
Why does the EPA charge time differ?
The EPA rates a full charge at 11.2 hours, yielding 29 miles of range per hour. Real world results hit 10.2 hours because testing protocols vary. Both numbers show practical overnight feasibility.
Do I need a permit for the install?
Most local jurisdictions require a permit for high voltage electrical work. Your electrician should pull this paperwork before starting the job. Inspections keep your home insurance valid.

Other vehicles

2027 Cadillac Lyriq 11kW Charger2027 Cadillac Lyriq 19kW Charger2027 Cadillac Lyriq V Series 11kW Charger2027 Cadillac Lyriq V Series 19kW Charger2027 Cadillac Optiq 11kW Charger2027 Cadillac Optiq 19kW Charger

Charging times derived from EPA data for the 2025 Cadillac Lyriq (covering 3 EPA trim listings). Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.