What EV Charger Do You Need for a 2025 Tesla Model S Plaid?
You need a 48 amp Level 2 home charging setup to fill this battery overnight. The car limits AC intake to 11.5 kW. Internal hardware dictates that ceiling.
The numbers
| Maximum AC charging rate | 11.5 kW (48 A) |
|---|---|
| Charger size to buy | 48 A |
| Circuit breaker required | 60 A |
| Outlet / connection | hardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it) |
| Charge port | NACS |
| Full charge on Level 2 | about 9.8 hours |
| Range added per hour (Level 2) | about 35 miles |
| Full charge on a 120 V outlet | about 79 hours |
| Range added per hour (120 V) | about 4.4 miles |
| EPA rated range | 348 miles |
| Energy for a full charge | about 113.1 kWh at the wall |
Why 48 amps and not more
The onboard charger maxes out at 48 amps. Buying a larger charging unit changes nothing about charge speed. Extra hardware capacity sits idle because the car cannot draw past 48 amps. You get 35 miles of range per hour of charging at this rate. The EPA test protocol lists a slower 14 hour charge time and 25 miles per hour because standard federal test procedures do not run equipment at peak continuous rates.
What the install involves
A 60 amp breaker is mandatory for this load. Hardwiring is required because no household receptacle is rated for 48 amps. You must hire an electrician for this panel work and wire run. Do not attempt DIY installation on a dedicated 60 amp circuit.
Chargers that match this car
Your car has a NACS port. The NACS units below plug straight in; any J1772 unit works with the adapter supplied with the car.
Native NACS plug, no adapter needed.
Dual plug: works with NACS and J1772 cars.
Tesla's own unit. Native NACS, hardwire only.
Worth having as well
Common questions
- Can I plug this car into a standard wall outlet?
- Level 1 charging takes 79 hours to reach full capacity. You only get 4.4 miles of range per hour on standard household current.
- What connector does the car use?
- Tesla vehicles use the NACS connector. A J1772 adapter ships with the car for third-party Level 2 units.
- How long does a full charge take at maximum speed?
- It takes 9.8 hours to reach a full charge at 48 amps. The onboard charger caps power intake at 11.5 kW.
- Which EVSE model fits this vehicle best?
- The Tesla Wall Connector matches the 48 amp limit directly. It features a hardwire setup and a native NACS connector with a 24.0 foot cable.
Other vehicles
Charging times derived from EPA data for the 2025 Tesla Model S Plaid (covering 2 EPA trim listings). Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.