BuyWhatFits

What EV Charger Do You Need for a 2026 Cadillac Lyriq?

What to buy
A 48 A charger on a 60 A circuit
Your 2026 Cadillac Lyriq accepts at most 11.5 kW (48 A) of AC power. A larger charger will not charge it faster.

A full charge takes 10.4 hours on a proper Level 2 setup. That timeline easily covers an overnight turnaround for your daily driving needs. Plugging into a standard household wall outlet takes 83 hours, which makes Level 2 mandatory.

Matches your car
Emporia Level 2 EV Charger 48A
48 A · J1772 · both
See it on Amazon

The numbers

Maximum AC charging rate11.5 kW (48 A)
Charger size to buy48 A
Circuit breaker required60 A
Outlet / connectionhardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it)
Charge portJ1772
Full charge on Level 2about 10.4 hours
Range added per hour (Level 2)about 31 miles
Full charge on a 120 V outletabout 83 hours
Range added per hour (120 V)about 3.9 miles
EPA rated range326 miles
Energy for a full chargeabout 120.0 kWh at the wall

Why 48 amps and not more

Your car accepts a maximum draw of 48 amps. Buying a smaller charger means slower speeds and wasted time. The battery holds 120.0 kWh of energy. A 48-amp supply pushes 31 miles of range into the pack every hour. Pumping more current into the vehicle will not speed up the charge because the onboard charger maxes out at 11.5 kW.

What the install involves

You need a 60-amp breaker to supply the 48-amp EVSE safely. No household receptacle handles this continuous load, so your charging unit must be hardwired directly. Call a licensed sparky to pull the heavy copper wire, land it on the new breaker, and verify your main panel has the spare capacity. Skipping these safety steps risks thermal damage to your home wiring.

Chargers that match this car

Level 2 EV Charger 48A
48 A · J1772 · both · 24.0 ft cable
Energy monitoring built in. Hardwire it for the full 48 A.
See the Emporia Level 2 EV Charger 48A
Pulsar Plus 48A
48 A · J1772 · hardwire · 25.0 ft cable
Compact unit, good for tight garages.
See the Wallbox Pulsar Plus 48A
Home Flex 50A Hardwired
50 A · J1772 · hardwire · 23.0 ft cable
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
See the ChargePoint Home Flex 50A Hardwired

Worth having as well

Tesla to J1772 Charging Adapter 80A
Lets a J1772 car use Tesla Destination Chargers and Wall Connectors.
See the Lectron Tesla to J1772 Charging Adapter 80A
J1772 Extension Cable 20ft 40A
For when the charger cable will not reach your car's port.
See the EVCONN J1772 Extension Cable 20ft 40A
As an Amazon Associate we earn from qualifying purchases. Prices and availability are not shown here because they change constantly, so check the current price on Amazon.

Common questions

What connector does this vehicle use?
The car uses a J1772 connector. Many units ship with a NACS port and include a J1772 adapter, so a standard J1772 home charger still works. Confirm your port type before ordering equipment.
Can I use a normal wall outlet?
You can plug into a standard household outlet for Level 1 charging, but it delivers only 3.9 miles of range per hour. Filling the battery this way takes 83 hours. You need a dedicated Level 2 circuit for practical daily use.
Why does the EPA charge time differ from the maximum rate?
The EPA test estimates an 11.2 hour charge time at 29 miles per hour because standardized testing conditions vary. Your actual vehicle hits 10.4 hours and 31 miles per hour when running at its peak onboard AC rate.
Do I need a special adapter for Tesla chargers?
You can use a Tesla to J1772 adapter like the Lectron unit to plug into Tesla Destination Chargers and Wall Connectors. This gives you more options when you travel away from home.

Other vehicles

2027 Cadillac Lyriq 11kW Charger2027 Cadillac Lyriq 19kW Charger2027 Cadillac Lyriq V Series 11kW Charger2027 Cadillac Lyriq V Series 19kW Charger2027 Cadillac Optiq 11kW Charger2027 Cadillac Optiq 19kW Charger

Charging times derived from EPA data for the 2026 Cadillac Lyriq (covering 3 EPA trim listings). Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.