What EV Charger Do You Need for a 2026 Toyota bZ Woodland?
Wiring a home garage for this Toyota requires running a dedicated circuit and landing a 60 amp breaker in your electrical panel. You need a 48 amp charger to feed the 81.5 kWh battery pack at its maximum onboard AC rate. This setup delivers 38 miles of range per hour, taking 7.4 hours to fill the vehicle from empty. A licensed electrician must pull the heavy gauge wire and inspect your panel for spare capacity.
The numbers
| Maximum AC charging rate | 11.0 kW (48 A) |
|---|---|
| Charger size to buy | 48 A |
| Circuit breaker required | 60 A |
| Outlet / connection | hardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it) |
| Charge port | J1772 |
| Full charge on Level 2 | about 7.4 hours |
| Range added per hour (Level 2) | about 38 miles |
| Full charge on a 120 V outlet | about 57 hours |
| Range added per hour (120 V) | about 5.0 miles |
| EPA rated range | 281 miles |
| Energy for a full charge | about 81.5 kWh at the wall |
Why 48 amps and not more
The car accepts a maximum of 48 amps on Level 2 AC power. Buying a larger unit offers no speed advantage because the onboard charger caps the intake at 11.0 kW. Feeding it anything less slows down the turnaround time unnecessarily. Lower amperages mean longer overnight waits to reach the 281 mile range limit. Match the hardware to the vehicle limit and skip the bottlenecks.
What the install involves
A 48 amp continuous load demands a hardwired connection because no standard household receptacle handles that draw safely. Your electrician needs to run copper wiring rated for the load directly to the charging unit. Check your main service panel before buying equipment to verify it can support a 60 amp breaker. Local permits and inspections apply to this kind of heavy electrical work in most municipalities.
Chargers that match this car
Energy monitoring built in. Hardwire it for the full 48 A.
Compact unit, good for tight garages.
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
Worth having as well
Common questions
- What connector does the car use?
- The vehicle features a J1772 connector. This model year falls in the industry transition, so confirm your specific port before purchasing hardware.
- Can I use a standard wall outlet?
- Plugging into a normal household outlet delivers Level 1 speeds. That yields 5.0 miles of range per hour and takes 57 hours for a full charge.
- Why does the EPA charge time differ from the maximum rate?
- The EPA rated test takes 8.0 hours at 35 miles of range per hour. Official test cycles do not always run at the absolute peak AC rate of the vehicle.
- Will an extension cable help if my cord is too short?
- You can buy a J1772 extension cable rated for 40 amps to bridge the distance. Always make sure connections stay dry and clear of standing water.
Other vehicles
Charging times derived from EPA data for the 2026 Toyota bZ Woodland (covering 2 EPA trim listings). Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.