BuyWhatFits

What EV Charger Do You Need for a 2025 Hyundai Ioniq 6?

What to buy
A 48 A charger on a 60 A circuit
Your 2025 Hyundai Ioniq 6 accepts at most 10.9 kW (48 A) of AC power. A larger charger will not charge it faster.

Forty-eight amps is the magic number for your 2025 Hyundai Ioniq 6. This draw fills the 88.9 kWh battery from empty in 8.2 hours on a Level 2 setup. You will get 42 miles of range for every hour plugged into a home unit. Check your port physically before buying gear because this model year spans the industry connector transition.

Matches your car
Emporia Level 2 EV Charger 48A
48 A · J1772 · both
See it on Amazon

The numbers

Maximum AC charging rate10.9 kW (48 A)
Charger size to buy48 A
Circuit breaker required60 A
Outlet / connectionhardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it)
Charge portJ1772
Full charge on Level 2about 8.2 hours
Range added per hour (Level 2)about 42 miles
Full charge on a 120 V outletabout 62 hours
Range added per hour (120 V)about 5.5 miles
EPA rated range342 miles
Energy for a full chargeabout 88.9 kWh at the wall

Why 48 amps and not more

The onboard charger caps AC intake at 10.9 kW, which translates to a 48 amp limit. Buying a 50 amp or 80 amp charger gives you zero speed gains because the car cannot draw past its internal limit. Sticking to a 48 amp EVSE delivers the maximum possible Level 2 charging speed your specific hardware accepts. The EPA test routine clocks a slightly faster 7.5 hour full charge time and 46 miles per hour due to test cycle parameters rather than car limits. Anything smaller leaves overnight recovery time unnecessarily long.

What the install involves

A 48 amp continuous load requires a dedicated 60 amp breaker paired with heavy gauge copper wiring. Hardwiring is mandatory here because no standard wall receptacle safely handles continuous 48 amp draws. Plug-in options at this amperage melt wall outlets and start fires. Hire a licensed electrician to run the circuit directly from your main electrical panel to the charging location.

Chargers that match this car

Level 2 EV Charger 48A
48 A · J1772 · both · 24.0 ft cable
Energy monitoring built in. Hardwire it for the full 48 A.
See the Emporia Level 2 EV Charger 48A
Pulsar Plus 48A
48 A · J1772 · hardwire · 25.0 ft cable
Compact unit, good for tight garages.
See the Wallbox Pulsar Plus 48A
Home Flex 50A Hardwired
50 A · J1772 · hardwire · 23.0 ft cable
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
See the ChargePoint Home Flex 50A Hardwired

Worth having as well

Tesla to J1772 Charging Adapter 80A
Lets a J1772 car use Tesla Destination Chargers and Wall Connectors.
See the Lectron Tesla to J1772 Charging Adapter 80A
J1772 Extension Cable 20ft 40A
For when the charger cable will not reach your car's port.
See the EVCONN J1772 Extension Cable 20ft 40A
As an Amazon Associate we earn from qualifying purchases. Prices and availability are not shown here because they change constantly, so check the current price on Amazon.

Common questions

Can I plug this into a normal wall outlet?
No. A standard household outlet provides Level 1 power at 5.5 miles of range per hour and takes 62 hours for a full tank.
What connector does the car use?
It uses a J1772 connector, though this model year falls in the NACS transition and may include an adapter. Verify your specific physical port before ordering hardware.
Do I need a 60 amp breaker?
Yes. Continuous electrical loads require a breaker rated for 125 percent of the maximum draw, which puts a 48 amp charger squarely on a 60 amp circuit.
Why does the EPA charge time differ from the max rate?
The EPA testing protocol calculates efficiency and speed under specific laboratory conditions that do not always mirror a continuous flat-rate charge to absolute zero.

Other vehicles

2027 Hyundai Ioniq 52027 Hyundai Ioniq 6 N2026 Hyundai Ioniq 52026 Hyundai Ioniq 5 N2026 Hyundai Ioniq 5 Robo taxi2025 Hyundai Ioniq 5

Charging times derived from EPA data for the 2025 Hyundai Ioniq 6 (covering 5 EPA trim listings). Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.