What EV Charger Do You Need for a 2026 Jeep Recon Moab?
Wiring a home charging station for the Jeep Recon Moab means installing a dedicated 60 amp breaker and running heavy copper wire to a hardwired unit. You need a 48 amp Level 2 setup to match the vehicle onboard charger. Plugging into a standard household outlet will only add 3.0 miles of range per hour, meaning a full recharge takes 73 hours.
The numbers
| Maximum AC charging rate | 11.0 kW (48 A) |
|---|---|
| Charger size to buy | 48 A |
| Circuit breaker required | 60 A |
| Outlet / connection | hardwired (a 48 A EVSE must be hardwired -- no household receptacle is rated for it) |
| Charge port | J1772 |
| Full charge on Level 2 | about 9.6 hours |
| Range added per hour (Level 2) | about 23 miles |
| Full charge on a 120 V outlet | about 73 hours |
| Range added per hour (120 V) | about 3.0 miles |
| EPA rated range | 222 miles |
| Energy for a full charge | about 105.6 kWh at the wall |
Why 48 amps and not more
The vehicle draws up to 48 amps on Level 2 equipment, translating to 23 miles of range added every hour. Going down to a smaller 32 amp or 40 amp circuit slows down your daily turnaround time without saving much on hardware costs. Pushing past 48 amps does not speed up the process either because the internal hardware caps power draw at 11.0 kilowatts. Feeding it a 60 amp breaker with a hardwired connection delivers the fastest safe AC charge possible. A completely empty 105.6 kWh battery pack reaches full capacity in 9.6 hours at this maximum rate.
What the install involves
A licensed electrician must pull a dedicated circuit from your main electrical panel to the parking spot. The installation requires a 60 amp breaker paired with heavy gauge wire sized for continuous loads. Hardwiring is mandatory for this amperage level because no household receptacle is rated for a continuous 48 amp draw. Ask your electrician to verify that your panel has enough spare capacity before buying hardware.
Chargers that match this car
Energy monitoring built in. Hardwire it for the full 48 A.
Compact unit, good for tight garages.
Adjustable from 16 A to 50 A in the app, which helps if your panel is tight.
Worth having as well
Common questions
- Can I use a standard wall outlet?
- Plugging into a regular 120 volt outlet provides only Level 1 speeds. That method delivers 3.0 miles of range per hour and requires 73 hours for a complete fill.
- What connector does this vehicle use?
- The car features a J1772 connection. This model year falls in the industry transition period, so many vehicles ship with a NACS port but include a J1772 adapter.
- Do I need a hardwired charger or can I use a plug?
- You must hardwire a 48 amp charger. No household receptacle is rated to handle a continuous 48 amp electrical load safely.
- How long does a full charge take on Level 2?
- A full charge takes 9.6 hours when using the maximum 48 amp Level 2 rate. The EPA test estimates a slightly different duration of 9.4 hours under standard testing conditions.
Other vehicles
Charging times derived from EPA data for the 2026 Jeep Recon Moab. Electrical requirements follow NEC 625.41, which sizes a circuit at 125% of a continuous load. Always have a licensed electrician verify your panel.